Archi Edson Chock 38 (1923) В продаже

2021 SCOTTO SHIPYARD, MARSEILLE, FRANCE
- Localized redesign of the underbody with A4 6 mm stainless steel screws - Repair of the mast around the spreaders and jumper forestay fittings.
- Reinforcement of the spreader fittings.
- Replacement of mast partners
- New mast sealing collar and shim set
- Repair of the deck beam/shelf at the mast level
- Installation of 3 new oak knees on the port side
- Repair of 3 solid oak frames
- Painting of the entire hull with AWL CRAFT 2000 F5050
2016 CHANTIERS LOBRICHON & INFINITY LE BORGNE, MORBIHAN, FRANCE
- Refurbishment of approximately 1.5 m of wooden keel and lower chords at the mast foot
- New mast foot
- New engine mounts and driveshaft
- Motor box with insulation
- Installation of a new Nani N2.10 inboard diesel engine and gearbox
2009 - 2010 IN SYDNEY, BRITISH COLUMBIA, CANADA
- White oak boat cropping
- Original fluted mahogany siding with epoxy-coated western red cedar
- The new western red cedar bridge, covered with bi-axial fabric and epoxy
- Shell shrouded and painted with a two-piece urethane product from Ditsler.
- Owners logged 2,600 hours of work dedicated to this process.
- This figure is considered reasonable given the scale of the project and the finishing details achieved.