Beneteau Oceanis Clipper 393 (2005) Zum Verkauf

Boat Description
2005 model year Beneteau Oceanis 393. Three cabin. A lovely clean example of this popular model. Good specification with many items modernised over the last few years. Standing rig replaced in 2019, instruments 2018. Sails are all less than 10 years old including fully battened main, 140% Genoa and a No2 (2018).
Tax and Location
Tax paid in Greece. Proof of location within the UK waters at Brexit swap over date.
Lying in the water at Sovereign Harbour in Eastbourne.
Sail Area
I : 46.10 ft
J : 14.53 ft
P : 40.35 ft
E : 15.09 ft
Working Sail Area : 807.29 sq ft
Structure
Foam sound-proofed engine compartment.
Engine control panel with rev. counter and alarms on starboard cockpit coaming with Perspex protection.
Stainless steel propeller shaft with GRP protection moulded into the hull. Fixed 3-blade propeller.
Engine control lever on steering console.
Engine mounting built into the inner mould.
Rotomoulded 135L diesel tank aft, fitted with electronic gauge.
Salt water and diesel filters with sediment reservoirs.
Additional Description
The hull is a single-skinned GRP construction.
A structural inner moulding is bonded and laminated to the hull at various points. Its structural role is important as it takes and absorbs the stresses at pressure points (chain plate tie rods, keel, rudder, etc.) spreading the loads and so guaranteeing reduced stress on the hull.
The surface of the inner moulding makes cleaning easier and provides a better finish.
The propeller shaft is protected by a moulding in the hull.
Deck Construction
The deck is a balsa sandwich construction for an optimal strength/weight ratio and for good thermal and sound insulation.
Mooring and Anchoring
Welded stainless steel bow fitting with offset bow roller for anchor stowage. 4 aluminium roller fairleads on toerail. There are 2 roller fairleads between the bow fitting and the toerail.
6 x 300mm aluminium mooring cleats. 1 sheave. Main anchoring kit has 1 flat 16 kg anchor, 1 x 50m 10mm chain and 20m warp.
800W 12V electric windlass with waterproof relay housing and on-deck up/down switches assisting anchor handling. Self-draining anchor well with hatch cover.
Bathing Platform and Transom
Transom with teak covered bathing platform and sliding access gate. Stainless steel bathing ladder with teak treads and a handrail. Outboard motor bracket. Protective rubber rubbing strake. Cold water cockpit shower.
CE Navigation Class
CE navigation class: A/8 - B/10
Inventory Included
Plastimo Dinghy and Mercury outboard 2.5hp
Compass
Fuel gauge
Volt meter
8 ropes & 8 fenders
Anchor with 50m chain and 20m warp
Raymarine depthsounder
Raymarine Log
Raymarine windspeed/direction
Raymarine plotter
Raymarine autopilot
Raymarine GPS
Raymarine VHF
Radar reflector
CD player with speakers
Electric and manual bilge pumps
Eberspacher 4kw diesel heating system
Hot and cold water system
Marine heads
Battery charger
Fridge
Eno oven
Bimini top
Mainsail cover
Sprayhood
Lazy bag for main with lazy jacks
]]>