Archi Edson Chock 38 (1923) For sale
Description
2021 SCOTTO SHIPYARD, MARSEILLE, FRANCE
- Localized redesign of the underbody with A4 6 mm stainless steel screws - Repair of the mast around the spreaders and jumper forestay fittings.
- Reinforcement of the spreader fittings.
- Replacement of mast partners
- New mast sealing collar and shim set
- Repair of the deck beam/shelf at the mast level
- Installation of 3 new oak knees on the port side
- Repair of 3 solid oak frames
- Painting of the entire hull with AWL CRAFT 2000 F5050
2016 CHANTIERS LOBRICHON & INFINITY LE BORGNE, MORBIHAN, FRANCE
- Refurbishment of approximately 1.5 m of wooden keel and lower chords at the mast foot
- New mast foot
- New engine mounts and driveshaft
- Motor box with insulation
- Installation of a new Nani N2.10 inboard diesel engine and gearbox
2009 - 2010 IN SYDNEY, BRITISH COLUMBIA, CANADA
- White oak boat cropping
- Original fluted mahogany siding with epoxy-coated western red cedar
- The new western red cedar bridge, covered with bi-axial fabric and epoxy
- Shell shrouded and painted with a two-piece urethane product from Ditsler.
- Owners logged 2,600 hours of work dedicated to this process.
- This figure is considered reasonable given the scale of the project and the finishing details achieved.
- Localized redesign of the underbody with A4 6 mm stainless steel screws - Repair of the mast around the spreaders and jumper forestay fittings.
- Reinforcement of the spreader fittings.
- Replacement of mast partners
- New mast sealing collar and shim set
- Repair of the deck beam/shelf at the mast level
- Installation of 3 new oak knees on the port side
- Repair of 3 solid oak frames
- Painting of the entire hull with AWL CRAFT 2000 F5050
2016 CHANTIERS LOBRICHON & INFINITY LE BORGNE, MORBIHAN, FRANCE
- Refurbishment of approximately 1.5 m of wooden keel and lower chords at the mast foot
- New mast foot
- New engine mounts and driveshaft
- Motor box with insulation
- Installation of a new Nani N2.10 inboard diesel engine and gearbox
2009 - 2010 IN SYDNEY, BRITISH COLUMBIA, CANADA
- White oak boat cropping
- Original fluted mahogany siding with epoxy-coated western red cedar
- The new western red cedar bridge, covered with bi-axial fabric and epoxy
- Shell shrouded and painted with a two-piece urethane product from Ditsler.
- Owners logged 2,600 hours of work dedicated to this process.
- This figure is considered reasonable given the scale of the project and the finishing details achieved.
Archi Edson Chock 38 (1923) - 89,500 EUR
Main data
Shipyard
Archi Edson Chock
Model
38
Year built
1923
Length
11.6
m
Code
842075
Last updated
5/16/2025
Price
Price
89,500 EUR
VAT
VAT included
Engines
Power
1 x 0 Hp
Model
Nanni N2.10
Located
Visible country
France
Technical data
Overall length
11.6
m
Width
2.45
m
Draft
1.7
m
Accessories
No data available
Do you want to know more about this boat?
Habitability
No data available
Composition
No data available
Materials
No data available
Sails
No data available
Do you want to know more about this boat?
Other boats that may interest you...
-
![Image]()
Hanse 400e - 400 E (2006)98,000 EUR -
![Image]()
Bavaria 38 Cruiser (2008)(97,500 €) 89,500 EUR -
![Image]()
Bavaria 39 Cruiser (2006)83,000 EUR -
![Image]()
Ferretti Yachts 42 Altura (1987)85,000 EUR -
![Image]()
Dufour Yachts 40 Performance (2004)96,500 EUR -
![Image]()
Danish Yachts Danish Rose 35 (1988)97,500 EUR -
![Image]()
Hanse 371 (2003)89,990 EUR -
![Image]()
Bavaria 38-3 (2004)85,000 EUR -
![Image]()
Beneteau Oceanis 393 Clipper (2004)85,000 EUR -
![Image]()
Elan Line Elan 384 Impression (2005)91,000 EUR
In YachtVillage
© 2025 YachtVillage - Design by Digibusiness Srl - P.IVA IT02184210348 - Powered by Navis.net