Beneteau Oceanis Yacht 54 (2026) In vendita

FACTORY OPTIONS
DEEP CAST IRON KEEL
3 CABINS 2 HEADS VERSION - WALNUT ALPI
SAILS LOCKER
FURLING MAST VERSION
COMFORT TRIM LEVEL Coastal B&G Pack
1 Port electric Harken H50.2 STAEH rigging winch (in lieu of standard)
Windlass control in cockpit with chain counter
Tilting transom remote control
Tunnel bow thruster + 4 Dedicated batteries (50 Amps-12V) +1 Battery charger (30 Amps-24V)
TECMA electric fresh water/sea water
WC in the owner's head
IBS sensor
2 Additional 140 ampères service batteries
Additional 40 ampères battery charger
Electrical engine control on the starboard console
Mosquito nets for opening portholes
Spring mattress in the owner's cabin (thickness: 180mm / 7'')

MOORING-ANCHORING PACK Delta 32 kg/71 lbs anchor (galvanized steel)
Chain Lines
6 Fenders:
- 4 XL
- 2 L
4 Moorings lines

COASTAL PACK - B&G Port and starboard helm stations:
- 1 12'' Zeus3S wide wireless multi-function touchscreen (GPS, Chart plotter, Card reader
- Navionics Silver cartography included)
Windvane, Anenometer B&G
Sensor (Log, Speedometer, Temperature)
PC interface
V90S VHF radio fixed to the chart table, AIS receiver function
Protective covers for helm & consoles (Charcoal Grey)

COCKPIT BIMINI WITH LED LIGHTING - CHARCOAL GREY
ELECTRIC DECK WASH PUMP (SEA WATER-FRESH WATER)
DOCK WATER INLET
WATER MAKER (60 LITERS/HOUR 12V/230V)
ELECTRIC TOILET QUIET FLUSH -PORT.AFT- SEA/FRESH WATER -3C3H
B&G HALO 20+ RADAR
AIS 500 B&G
LAUNCHED, RIGGED, ANTIFOULING
STANDARD EQUIPMENT


CONSTRUCTION _________________________________
• Design in accordance with European Directive requirements and
according to CE certification
• ISO 12215 certified structure
• Balsa sandwich infusion hull
• Vacuum infused structural inner liner (Fabrics - resin) bonded to the
hull
• Deck in glass fibre/balsa wood sandwich infusion, with non-slip
"diamond point" surface
• Cast iron keel attached with bolts and bonded stainless steel
backplate
• Twin rudders hung with stainless steel stock
• White coloured hull - Aluminum grey hull decoration
• 8 Hull portholes
DECK EQUIPMENT________________________________
RIGGING
• Depending on version:
- Aluminimum mast with in-mast furling deck-stepped, 2 Aft
swept spreaders
- Performance classical aluminimum mast deck-stepped (+
1,80m / 5’11’’) 3 Aft swept spreaders
• Split backstay (Hydraulic optional extra)
• Single-strand rigging
• Anodised aluminum boom
• Harken blocks at mast foot
• Rigid boom vang with tackle
• 2 Stand-up blocks for mainsail sheet on mainsail cradle
• 1 Self-tacking jib track with traveller
• All lines brought back to the helm stations (except boom uphaul and
Genoa halyard)
• Complete running rigging:
- Mainsail halyard
- Genoa halyard with on-mast tensioner
- Boom topping lift with cleat on mast
- Mainsheet
- 1 Self-tacking jib sheet
• Mainsail furtler and self-clinching jib furler on deck
• 7 Halyard clutches (1 triple to starboard, 2 doubles to port)
• Halyard covers
• 1 Flag halyard
WINCHES
• 1 Manual self-tailing winch to starboard (H50.2 STA)
• 1 Port side manual self-tailing winch (H50.2 STA)
• 1 Aluminum Speed Grip winch handle
• Stowage of which handles in dedicated space in rope bags
SAILS (INCIDENCES)
• Dacron furling mainsail with Natural UV protection
• Dacron self-tacking jib with Natural UV protection
MOORING LINES - MOORING
• Polyester bowsprit with integrated anchoring gear and bobstay with
spinnaker chainplate (for Code 0 and asymmetric spinnaker)
• Self-draining chain locker, Clench bolt, Piston-driven cover
• Single roller stainless steel bow fitting
• 12 V - 1 500 W vertical electrical windlass - Remote control in
mooring locker
• 6 Aluminum mooring cleats (Length: 40 cm / 1’4’’)
• Stainless steel chafing plate

SAIL LOCKER
Access through T70 deck hatch, Passage width: 0,65 x 0,65m /
2’2’’ x 2’2’’
• Stainless steel ladder
• Shelving and stowage trays
• LED lighting
• 1 230V socket
SAFE